----

• • Base Cabinet dimensions : 860±3 mm W X 600±3mm D X 655±3 mm H with Castors
• • Compliance certificate of (electronic/light part) CE with four-digit code (for electrical and electronic)
• • Airflow type in side fume hood - Low Constant Volume
• • Powder coating Complete metallic parts are processed with multi tank pre- treatment and finished with highly corrosion resistant paint with epoxy powder coating
• • MOC-Galvanized Iron 1.0-1.25 mm thickness for all sheet metal 1.2-1.5 mm for back pillars 1.2-1.5 mm for front corner post
• • Front top panel Easily open able hinged Top Panel
• • Inside liner - Chemical & heat resistant fire retardant smooth finish easily cleanable panels made out of durable thickness
• • Active kinetics exhaust system (5-7) with mild to rapid exhaust of fumes
• • Exhaust motor – 3 phase Direct current type auto electricity load adjustment facility which is interlink with sash opening
• • Fume hood will support in AC room without any extra/unnecessary power load
• • Worktop- ‘Jet Black Granite’ worktop with 18 ±5 mm thickness
• • Sink with Water tap and drain arrangement
• • Glass sash (minimum 5 mm thickness Toughened) with Vertical rising sash counter with a Clear open able height of minimum 750 mm
• • Wet and dry service valves total 6 nos. Colour coded Brass Needle valves with PU plumbing with 6 mm internal diameter (2 for Raw water (PU) 2 for Nitrogen (PU) 2 for Vacuum (Teflon)
• • Maintenance ports with openable top panel and Rectangular Service panel
• • Internal Nozzles with Brass powder coated fittings
• • Lighting LED light with vapor-proof fitting
• • Electrical utilities with MCB -Anchor/reputed brand- 6 nos. electrical sockets (230 V
• 6/16 A
• 50 Hz)
• • Built-in Starter: The electrical wiring will have built-in starter suitable to blower motor capacity
• • Cable entering port both side of fume hood to electrical sockets
• • Chemical storage base cabinets with Highly corrosion resistant epoxy powder coating
• 60-80 microns thickness with Special chemical & heat resistant smooth finish easily cleanable panels made from durable PRL sheets. At least one exhaust ports connected to the fume hood exhaust system internally
• • Apparatus holding grid made up of Duralumin Powder coated rod to hold the apparatus in the entire length of the fume hood in fume hood backside
• • Air Flow monitor Digital - To indicate the approximate face velocity of airflow
• • Ducting: Chemical resistant PP + FRP (3mm) rigid ductwork from Fume hood to exhaust stack point with weatherproof canopy.